Circutor CVM-C10 Series Uživatelský manuál stáhnout pdf (Strana 38)

4�9�2� Secondary voltage

On this screen the voltage transformer secondary is programmed.

Press key

for 3 seconds to edit the transformer secondary

value. The prog icon will be displayed on the bottom of the

screen.

To enter or modify the value, press the

key repeatedly,

increasing the value of the ashing digit.

When the desired value is shown on the screen, move onto the next digit by pressing the key

to modify the other values.

If you press the key after changing the last digit, it will jump back to the rst digit so you

can modify the previously programmed values again.

To validate the data, press for 3 seconds and the prog icon will disappear from the display.

The programmed value will be deleted if the entered value is higher than the maximum

programming value.

Maximum programming value: 999.

Minimum programming value: 1.

Press key to access the next programming step.

4�9�3� Primary current

The current transformer primary is programmed on this screen.

Press key

for 3 seconds to edit the transformer primary

value. The prog icon will be displayed on the bottom of the

screen.

To enter or modify the value, press the

key repeatedly,

increasing the value of the ashing digit.

When the desired value is shown on the screen, move onto the next digit by pressing the key

to modify the remaining values.

If you press the key after changing the last digit, it will jump back to the rst digit so you

can modify the previously programmed values again.

To validate the data, press for 3 seconds and the prog icon will disappear from the display.

The programmed value will be deleted if the entered value is higher than the maximum

programming value.

CVM-C10

Instruction Manual

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 81 82

Žádné komentáře

Circutor CVM-C10 Series Uživatelský manuál Strana 38